W and WIP Alarm panel
The W series control panel is a wireless hybrid alarm system. It is designed for residential and small business security applications.
The W alarm panel protects assets and persons in a defined area, thanks to the installations of RSI radio detectors.
With their LAN or 2G3G transmitters, the events are perfectly transmitted from the W and WIP panels to the security server. The available variants allow for any needed combination : LAN, 2G, 2G+LAN, 3G+LAN.
The WIP210 panel is fitted with two transmitters (2G3G and LAN), allowing perfect reporting to the security server.
This panel is powered by USB 5VDC (5VDC for WIP6xx and WIP 7xx) through an AC adapter/charger. In case of power failure, a rechargeable lithium battery will power the system.
The following customization options allow you to con gure the alarm system as needed:
- WLAN 802.11 (WWB100) transmitter option
- Supervised wired input/outputs option (WIO100) to link the system to wired devices.
- A wired and supervised siren option (WIS100) connected to the W panel also allowing the use of additional Videofied wireless sirens (indoor and outdoor).
A programming keypad is mandatory to install, set up and use the W alarm panel.
With the two modes of transmission, LAN/WLAN and GSM, the W series panel ensures maximum safety. In case of LAN/WLAN connection loss, the W panel will switch immediately to GSM to transmit alarms and videos.
SUPERVISED WIRELESS TECHNOLOGY
The W series, along with all Videofied devices uses patented S2View® – Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology, providing optimum signal integrity and security.
Bi-directional RF communication between all system devices and the system control panel assure high signal reliability.
Integrated antennas eliminate protruding wires or rods cumbersome to install and unsightly to consumers, and if damaged could lead to potential system communication problems.
The panel supervises every device (excluding the remote keyfob) to monitor current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.